845.679.2862 | Hours: MON-SAT 7-6 | SUN 8-5 | 84 Tinker St. Woodstock, NY 12498 | Get Store Directions
LOG IN ACCOUNT
Lampholders & Sockets
Pony cleat-type surface mount lampholder. Phenolic plastic. 75W/120V. Ivory. UL listed.
Pony cleat-type surface mount lampholder. Phenolic plastic. 75W/120V. Ivory. UL listed.
Single-circuit brass turn-knob. Phenolic interior and removable knob. 1/8-inch tapped bushing with set screw. 250 watt/250 volt. UL (Underwriter's Laboratories) listed.
Porcelain keyless fixture lamp socket. Single-circuit, medium base. For indoor/outdoor use, adaptable to many different fixtures. Features leads and removable bracket. Leads are 9 inches long, stripped 3/4-inch. 660 watts/250volts. UL (Underwriter's Laboratories) listed.
Short keyless lamp socket. Brass construction with phenolic interior. Cap features 1/8-inch threaded bushing. Medium base. 660 watts/250 volts. UL (Underwriter's Laboratories) listed.
Medium base, 1-piece keyless incandescent lampholder. Bracket mount, single-circuit, and back-wired. 660 watt/250 volt. UL (Underwriter's Laboratories) listed. CSA (Canadian Standards Association) certified. Unglazed porcelain, white.
Medium base keyless lamp socket, with 1/8 IP threaded hickey for exterior fixtures. Porcelain construction. UL (Underwriter's Laboratories) listed.
Phenolic interior lamp socket featuring polished gilt brass finish. Compatible with medium base incandescent light bulb. 1/8 In. IPS tapped bushing with set screw. 660 watt/250 volt. UL (Underwriter's Laboratories) listed.
1-piece, high-heat bakelite body for temperatures up to 150 degrees Celsius. Will stand temperatures up to 250 degrees Celsius on intermediate use. Switch built in/open screw terminals. Turn knob is non-removable. Overall length: 1-5/16 inches. Bushing length: 3/8-inch x 0.27-inch x 11/32-inch. Wire recommended for specific temperature as follows: AWM (plastic) wire - 105 degrees Celsius/221 degrees Fahrenheit, AF (asbestos) wire - 150 degrees Celsius/302 degrees Fahrenheit, SF (silicone) wire - 200 degrees Celsius/392 degrees Fahrenheit. UL (Underwriter's Laboratories) listed.
Medium base, 1-piece, keyless incandescent lampholder. Bracket mount, single circuit, and back wired. 660 watts/250 volts. UL (Underwriter's Laboratories) listed. CSA (Canadian Standards Association) certified. Phenolic construction.
3-way turn-knob lamp socket with polished gilt brass finish. Features phenolic interior construction and removable knob. 1/8-inch tapped bushing with set screw. 250 watts/250 volts. UL (Underwriter's Laboratories) listed.
Phenolic interior lamp socket with high heat push-buttons. 1/8-inch tapped bushing with set screw. Polished gilt brass finish. 660 watt/250 volt. UL (Underwriter's Laboratories) listed.
2-piece ring-type lamp socket. Features removable oaklite interior. Large head binding post screws for direct wiring. 1-3/4 In. O.D. x 1-3/8 In. H. Ring is 3/4 In. high with lip to fit standard 1-7/16 In. hole. Gasket furnished. Short chain, 3 Ft. braided cord, and bell included. Rated 660 watt/250 volt. UL (Underwriter's Laboratories) listed.
2-light lampholder cluster. Medium base with treated aluminum screw shell. Twin 1/8 IPS Male (top and bottom). 660 watts/250 volt. UL (Underwriter's Laboratories) and CSA (Canadian Standards Association) listed.
Snap-in lamp socket fits into 3/8-inch x 1/4-inch hole. Compatible with medium base incandescent light bulbs. CSA (Canadian Standards Association) and UL (Underwriter's Laboratories) listed.
